JP1 Remotes

Do you still have the JP1-USB cable? Will buy it off you.

Tak

Hi!

I'm selling my JP1 infrastructure. All units are in good condition and fully functional, if not stated differently in the item desc.

2x Conrad MF 355 RF
(RF transmission capability, works with PowerMid or Conrad receivers ...

Brilliant, worked like a charm.
Although I don't quite understand the logic of
Using X-shift phantom for the short press.
Calling up the key-sets for the 1st (short press) device within this X-shift phantom key.
Calling the phantom key from the 1s device's key in the Macro.

What does the X-shift ...

Here is the IR file uploaded to the Diagnostic area

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=5316

If I messed up the link please let me know.

In the device list I have
a BASE DVD as DVD (1st desired device on the DVD button)
a Panasonic DVD as CD (2nd desired device on ...

My first try at extender on an URC 8011 and a 6012. Have 8 devices to control.

Using LKP on M1 to turn all ON (phantom 1) and all OFF (phantom 2)
This LKP worked on both 8011 and 6012.

The 6012 is short of 2 Device buttons: CD and AUX.
Trying to use LKP on the DVD button to set mode to DVD with ...

I have read many post discussing use of special protocols such as Toadtog but cannot find any examples of how it is used. Particularly in a macro.

My efforts on macros have been limited to putting multiple key presses from different devices onto one key. Each device upgrade has its own protocol to ...

It worked after modifying (repairing) the rdf.

So to summarise:
Error message "Bad checksum at address $000. Expected ....., but found ........" cannot be ignored.

To resolve it the rdf has to be modified.
1. Save a copy of 6_806_80(URC-881x_801x_601x 1k). rdf as backup.
2. Edit the rdf with a ...

Having problem with a URC6011 upgraded at OFA. So I take it is the 1K version. In fact if I try with anything but the 1k RDF IR complains and will not work with the wrong RDF. This is a log of what I did and what happened.

When first connected with JP1 cable and after opening IR, download from ...

Johnsfine, you may be right but how do I know if my image is a 2K instead of 1K? I am new at this.

This is what I had tried:
Reset by 981. Download the URC6011 and gets a error message "Bad checksum at address 0000. Expected $00 $FF but found $FF $00".
Click OK and IR says it is a 88xx/60xx 1K ...

More help needed !!

First, for your question Rob, the A, B, C buttons has no corresponding ones that I can find on the original Mellinnium 4. Even after mapping it to the URC8811 it seems to do nothing. So I am at a lost. There were other buttons mapped, according to the decode, but the ...

OK Robman, I will call it Motorola_Streamaster5000.txt. Put in Files/Device Codes/Cable area here .

In fact there was very little re-labelling I need to make. All but one of the buttons are right on the first pass. I re-labelled BYPASS function into TV/TID. It will upload to the correct buttons on ...

Thanks Robman. You had worked the magic. The KM file worked.
When I clean up the function re-label I will name it as CBL/1866.txt and put it in the file area.

Why did IR unable to decode the learned signal?
Is it encrypted or a complex signal?
How is the upgrade made without the learned signal ...

Have a Millenium 4 (4 device) with a cable code 0866 that I want to put onto my URC-6011.

Used an URC 8810 to learned the cable POWER on/off button. IR unable to decode the signal. Showed blank in the protocol, device, OBC, Hex Cmd, EFC etc.

In the Raw Data it says:
Frequencey 38461
Send once When ...

I have posted the IR extracted txt file for the CBL/0866 .here

This device code currently resides on the Mellelnium 4. Trying to get it onto the URC6011. Any help to identify its protocol will be most appreciated.

Thanks johnsfine.

It worked . Just loaded and tested the audio/0386 code onto the Millenium 4. Next is to experiment with adding more function. At least the remote is talking to the AV receiver.

Next is to sort out the CBl/0866.

A new world is opening.

Sorry Robman. Tried my link in the precious message and it doesn't seems to work. Here it is again. Fingers crossed.

urc6011.txt