JP1 Remotes

They still have not shipped my 7011 extenders..... I would say you will have low risk if you order your from the supplier you found and everything should work. Did not want to keep you hanging. Good Luck

Your'e interpretation is correct....... The RF-Link products, as well as, any IR extender puts a lot more power in the air up to the extent allowed by the FCC. The FCC has limits on signal stregth at given frequency bands across the spectrum. You do not have to worry about the bandwith of the RF ...

On the RF-LINK WAVECOM SR, the RCA component demodulated video and audio is transmitted on the 2.4 GHZ carier. The IR command from your remote is transmitted at 433 MHZ. But the WAVECOM SR modele is an overkill if you don't need to tranmit the video/audio. Thie IR extender feature (Which is what you ...

I checked with the folks at X10 and they told me that the box is for 310 MHZ vice 418MHZ or 430MHZ where the repeaters that we need operate.... Have you found any other purely RF repeaters out there. I would like to have one my self. In the mean time the IR based RF-LINK WAVECOM SR product works ...

I am in the exact same boat as you are and here is what I know we need to find out. What is the frequency of the 9910? I believe it is 433 MHZ +/-. Terk and powermid operate at 418 MHZ. "Myextender" supposively opoerates at 433mhz. I hooked up my RF-LINK WAVECOM SR which I believe is 433MHZ and it ...

Thanks for the reply Robman.... Can I get both SAT devices plugged without creating one from scratch in the KM excel sheets. Here is what I did. I uploaded the remote's memory/devices to IR which properly identified the deveice codes (The SAT code is what I was going after). Next I saved this IR ...

Hello,
I am new to JP1 programming, and after reading as much as could and downloading the program that are out there, I am still having some problems with some basics.

I am using a URC 9910 HT PRO Remote, and I am trying to load the codes for the RCA DTC210 HD SAT Reciever (Code 566 on the URC9910 ...