Telesystem TS-7510 HD

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

I was getting already to upload an IR file for Rob to decode, when I found a tele Systems 7510 RDMU file on my system. It has a custom protocol that seems to match.

The fixed data matched.
I only have the numbers 0-9 and ch+, ch- and power filled in. All of these match with the values that decoded.

So I downloaded the 7510 rdmu file, and most of the values match.

Apps and Teletext are different and each list has a few codes the other doesn't.

I couldn't read the Up, Menu and Exit buttons from your ICTs. I filled in the UP from the 7510 upgrade since all of the other arrows match.

36 might be menu, and 42 might be exit.
Tele Systems TS-7500 RDMU
https://www.hifi-remote.com/forums/dload ... e_id=11535
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

Fantastic, that is what I call service :D Hopefully the user will report back, I'll keep you informed.
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

vickyg2003 wrote:36 might be menu, and 42 might be exit.
Close :D It was the other way round. Everything else works, so I'll upload it next Saturday with all the rest of this weeks remotes (4 so far)

Thanks again

Al
Top
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

Hi Alan,
Actually I think 66 might be menu. I had mixed and matched to OBC and Hex columns.

I've updated my file.


Its always nice when the user gives us prompt feedback. :)
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

OK, I'll check
Top
The Robman
Site Owner
Posts: 21947
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

If there is a corresponding thread on this somewhere else, could you post a link to it please.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

http://answers.slingbox.com/message/79596#79596
Top
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

Doh, its only 2 threads down from this one. I had visually searched this forum and the slingbox forum and didn't see it!
https://www.hifi-remote.com/forums/viewtopic.php?t=14303
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Top
The Robman
Site Owner
Posts: 21947
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

ok, I think the threads should be merged
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

User happy :D
Top
Post Reply

Return to “JP1 - Protocol Decodes”