JP1 Remotes

1. Device: Tivoli Audio, Model 10
2. Type of device: Radio
3. Year: 2010
4. JP1/UEI Remote model: Nevo c2
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything, only a cd/dvd code
12. If you have a OARUSB04G (or similar) remote, have you tried simpleset.com? n/a

I think it uses Sony codes, tried all built in Sony on nevo c2, but none worked.
In an old one for all support site I found codes1058, 1622, 1759, 2172, 1441, 2522, 1822, 2475, 1758, 1258, 1658, 1858, 1558, but I can’t upload them to my remote, I only tried with nec x 2 profile.

Thank you

I found a couple of possible candidates. Try these and report back.
https://www.hifi-remote.com/forums/dload ... e_id=26318

Dave, you are a star!
Thank you very much.
No 3 is the one. It gives main functions like power, volume, menu, mute. Memory presets and auto scan search do not work but there are physical buttons on the back of the radio so I do not mind that much.
Thank you for you support.

Great.

If you don't mind doing a little more testing to find the missing functions, please download again from the same link and try all the functions on the screens (dash through test 39) then let me know what each function does, if anything. It's possible the functions found may not even be on the original remote, like discrete on or certain input switching, for example.

Thank you for not giving up, you are very supportive.
Dash is the same as enter - dash button on the remote, bottom right button, next to 0. It controls the input source on the radio, aux, am, fm etc.
Test 2, sleep 20 minutes countdown or off
Test 7, Alarm
Test 12, preset 1
Test 14, preset 2
Test 24, preset 3
Test 25, preset 4
Test 28, preset 5
All others do nothing.
Still no auto frequency scan.

Thanks
Tony

Awesome. Thanks

Final version is here, at a different link. Renamed a few functions to match original remote. Moved dash (Source) to the Input button and put presets on the num keys. Other functions are on the screen.

https://www.hifi-remote.com/forums/dload ... e_id=26321

You may find this built into some later UEI remotes as Audio setup code 3420 for power and volume functions only.

I tested it as soon as I returned from the office.
It is perfect!
All functions are working flawlessly.
Thank you very much, you really helped me.
I will now be able to use my little radio again.

Tony