Pioneer VSX-D912K

Draco · Post by **Draco** » Wed Jan 21, 2004 10:49 am

I'm surprised this isnt in the files section as it is a very popular receiver. If nobody has the codes I'll do the dirty work but I wont have time until the weekend

.

Post by **The Robman** » Wed Jan 21, 2004 11:18 am

You'll probably find that most of the other Pioneer upgrades will work with this receiver also. Try the Pioneer-master file.

Capn Trips · Post by **Capn Trips** » Wed Jan 21, 2004 11:39 am

Draco wrote:I'm surprised this isnt in the files section as it is a very popular receiver. If nobody has the codes I'll do the dirty work but I wont have time until the weekend .

I don't know what files section you're looking at, but if you look HERE you will find at least 5 upgrades for Pioneer VSX-Dxxx units, most of which are likely to be pretty darned close to what you need, not to mention the afore-mentioned Pioneer-Master-List on the same page.

Draco · Post by **Draco** » Wed Jan 21, 2004 12:58 pm

I was hoping for a 912K specific file. No biggie. I will see what I can do with the above-mentioned files.

thanks!

Capn Trips · Post by **Capn Trips** » Wed Jan 21, 2004 1:19 pm

Draco wrote:I was hoping for a 912K specific file. No biggie. I will see what I can do with the above-mentioned files.

thanks!

You know, this really strikes me as one of the GREATEST misconceptions people have when they come in to this JP1 world. That there is a HUGE bank of upgrades resident for EVERY combination of devices and remotes (and personal tastes) out there, and one can just come in and download and go.

Come on! Figure the odds that someone would not only have YOUR PRECISE model of receiver, and YOUR PRECISE MODEL of remote. And if he had that, that HIS PERSONAL BUTTON ASSIGMENT preferences would then MATCH YOURS PRECISELY!

If any ONE of those "ifs" is not met, you have to go into KM or RM and get your hands dirty. It's inevitable!

I apologize for the rant - I am not slamming you Draco, just trying to impress on you the extreme unlikelihood of such a perfect matchup. Even if you found an upgrade for the 912K, as soon as you go into KM or RM and change the remote type, you're forced into tweaking button assignments, since no two remotes have precisely the same button maps. And even if the remote matched, your personal preferences would still likely not be precisely met by the button assignments.

jhuang · Post by **jhuang** » Tue Oct 26, 2004 10:42 am

I picked up a demo VSX-D812 without the remote. Looking through all the device upgrade in the file section, I think I will be missing the 'MCACC setup' advanced code (this is the 'calibration' mentioned in the previous posts). Can anybody help? Thank you in advance.

Capn Trips · Post by **Capn Trips** » Tue Oct 26, 2004 3:04 pm

Well, as your 812 is probably most similar to the 912 listed above in this thread, it would probably be most useful for you to get the device upgrade that Draco ultimately ended up with. I would guess a better than even chance that his unit would have precisely that function and he could/should have learned it and used it in his upgrade.

Draco has apparently choseen to not upload his VSX-D912 upgrade to the file section, which is a shame - you might try PM-ing him to see if he has the function you seek. (This would be Draco's opportunity to give a little back to the JP1 community)

Post by **The Robman** » Tue Oct 26, 2004 3:57 pm

I just checked the manuals for the 812 and 912 on the Pioneer web site and the 912 does have the 'MCACC setup' button also, so getting Draco's file is the way to go.

jhuang · Post by **jhuang** » Tue Oct 26, 2004 6:10 pm

Thanks for the suggestion. I have PM'd Draco and hope to get something back. But he seems to have only posted 2 times since January. Not sure if he came in for a bit and stop visiting the forum. Fingers crossed. In the mean time hoping someone else might be able to help.

Mark Pierson · Post by **Mark Pierson** » Tue Oct 26, 2004 6:52 pm

jhuang wrote:I have PM'd Draco and hope to get something back.

If that doesn't work, try emailing him directly.

Post by **The Robman** » Tue Oct 26, 2004 7:40 pm

His email address is kw_bond (at) hotmail (dot) com

jhuang · Post by **jhuang** » Fri Oct 29, 2004 10:12 am

Thanks to Mark for the suggestion and to Rob for the email address. I sent out an email but have not received any reply. Anyway, Best Buy where I got the demo 812 is carrying the 814 which has a similar remote. I learned the remaining functions to my 2104. MCACC unfortunately did not work with Pioneer 3DEV using Rob's master-list. I changed to 4DEV and everything works fine. I modified the upgrade file to show what functions work on my 812 (see the notes). I will upload to file to the Yahoo file section for others to use. Again thanks.

Post by **The Robman** » Fri Oct 29, 2004 2:14 pm

From Jason's file, the MCACC button uses device code 165 with OBCs 090 and 201 (ie, the 2CMD structure). I have updated the master list upgrade to include these codes.

Jason, I also replaced your file with an updated one. I removed all the functions that you indicated didn't work and I assigned some of the functions to buttons (I noticed that you didn't have any functions assigned to buttons).

Here's a link to the file: Pioneer-VSXD812-4DEV.txt

Lurker · Post by **Lurker** » Sat Dec 04, 2004 12:57 pm

All of the Pioneer receiver upgrades (including the master-list) seem to be missing the codes for Auto Surround and Dialog Enhancement. Does anyone have these or know how to find them? Thanks.

I need these two codes to complete my upgrade for the VSX-1014, which I can upload when it is complete.

Post by **The Robman** » Sat Dec 04, 2004 1:04 pm

Lurker wrote:All of the Pioneer receiver upgrades (including the master-list) seem to be missing the codes for Auto Surround and Dialog Enhancement. Does anyone have these or know how to find them? Thanks.

I need these two codes to complete my upgrade for the VSX-1014, which I can upload when it is complete.

Do you have an original remote that includes these 2 buttons? If so, do you have a learning remote that you can use to capture them?

JP1 Remotes

Pioneer VSX-D912K

Pioneer VSX-D912K

Re: Pioneer VSX-D912K