JP1 Remotes

1. Device: Kodak HDTV Camera Dock
2. Type of device: Camera
3. Year: 2009
4. JP1/UEI Remote model: RCU810
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
10. Learning remote question? n/a

The "slide" button no longer works on my original remote... I found the following file containing all buttons EXCEPT "slide":
https://www.hifi-remote.com/forums/dload ... le_id=7489

Does anyone have a working file for every button on the Kodak HDTV Camera Dock remote?

Thanks.

That upgrade uses a very standard protocol (NEC1, dev 1) so you can try searching for the missing button yourself.

To do this, create a dummy upgrade that contains all of the OBCs that are not used in the upgrade, then test the upgrade on your camera, trying all of the buttons, until you find a button that does something.

Looking at the OBCs that are used, my guess is that you can skip OBCs in the range 32-63.

Thanks, I will give that a try.

Any luck?

rodenti wrote:1. Device: Kodak HDTV Camera Dock
4. JP1/UEI Remote model: RCU810
5. Do you have a JP1 cable? Yes

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10637
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10638

SlideShow is OBC 94, NEC1, Dev# 1 (btw)