Page 1 of 1

Airtel TV HD Satellite

Posted: Mon May 25, 2015 12:46 am
by hussain
Hi,

I am using slingbox m1 in india with my "airtel hd" receiver. Generally on any remote,

Up= channel up
down= channel down
right=volume up
left=volume down.

However, these keys on my receiver are just used for scrolling through menus. Now the issue is, I have two firetv sticks connected to tv's in other room and the firestick remote just has up,down,right and left buttons which mimic function of your remote in slingbox app. End result= I cannot change channels or turn volume up or down.

I want to edit my slingbox airtel bin file so that up becomes channel up and so on.

Can somebody please help me.

Posted: Mon May 25, 2015 12:53 am
by alanrichey
Are you using a built-in remote or one of our Custom Remotes ? If it's one of the Custom Remote, which one (URL) ?

thankyou for prompt response

Posted: Mon May 25, 2015 1:24 am
by hussain
Thankyou for prompt response, it is built in remote by name of "airtel hd"

Posted: Mon May 25, 2015 3:04 am
by alanrichey
All I can find is "Airtel TV HD Satellite" Is that it ?

thanks

Posted: Mon May 25, 2015 4:03 am
by hussain
yes thats the one

Posted: Mon May 25, 2015 5:48 am
by hussain
so any help possible :o

Posted: Mon May 25, 2015 6:34 am
by alanrichey
Not sure. The problem you have is that unlike you suggestion, the Ch+/- and Vol+/- on your remote are NOT the same as the Up/Down & Left/Right arrows. For example the Up button sends Code 88 and the Ch+ button sends code 32.

So if I remapped the Up button to send Code 32 then your Firestick would change channels OK, but you would not be able to use the arrow buttons on the menus when you are viewing through the M1.

Unless you want me to completely swap everything over so the arrow buttons operate Channel +/- and the Ch+/- buttons operate up/down ? You would just have to remember the difference.

I wouldn't bother about the Volums, as Sling never sends that code to the receiver, they hijack it to control the Slingplayer volume.

Posted: Mon May 25, 2015 7:43 am
by hussain
I don't need up,down, righ ,left as it only works for menu which i shall never access while in slingbox mode.

Can't you put same ir code twice e.g. set both cursor up and channel up to be the same ir signal.

thankyou for your help.

Posted: Mon May 25, 2015 9:27 am
by alanrichey
OK, how about this. I've only done the Channel at the moment

https://www.hifi-remote.com/forums/dload ... e_id=13381

Posted: Mon May 25, 2015 11:44 am
by hussain
you are a legend thanks a lot

Posted: Mon May 25, 2015 1:10 pm
by alanrichey
Good, happy with that or do you want me to do the volume as well (putting it on the left/right buttons will bypass Sling's hijacking.

Posted: Mon May 25, 2015 10:23 pm
by hussain
If you can put left right as volume, that would be brilliant thanks.

Posted: Tue May 26, 2015 12:22 am
by alanrichey

Posted: Wed May 27, 2015 11:42 pm
by hussain
thanks you are great.

Posted: Thu May 28, 2015 1:34 am
by alanrichey
Good, glad to help.