JP1 Remotes

I have a Philips MX3600D Home Theater System which I use Device code 1269 - Audio as directed by OFA, however none of the buttons function correctly with out the original remote, so I have 24 learned codes for this device to transfer and also a Philips TV which I use Device code 0054. What I need assistance with is how to move the learn keys to Key codes so I can move to the URC 9960 extender two version of remote software.

The next thing I need to do after I move to URC 9960 extender2 version of software is set up ToadTog & Discrete codes for the Philips TV and also the Philips MX3600D Home Theater System.

Can someone please help me as I'm at my wits end and have read every document as it relates to KM/RM/ ToadTog and etc and also the entire beginner JP1 files.

I sure would appreciate any and all assistance that anyone may be able to provide !!! My File is listed below for your review.

http://f4.grp.yahoofs.com/v1/UMoNQS43zN ... %20URC9960

Regards,

Terry






[/url]

Here's the help document that you need...
http://www.hifi-remote.com/jp1/help

And check the link in my sig regarding posting links that work.

Lets break down what you want to do in several phases:

1. Create Device upgrades that have all the commands you need
2. Test those and make sure they work.
3. Add advanced tools to get all the buttons in the right places.

To get you started on 1, I created two device upgrades in a ziped file for you. The first Philips_MX3600D_KM.txt are the learned commands in the RC5 protocol using the RC5/5x combo protocol. Since the 3600 uses a number of different device numbers then this is more efficient.

You can learn all the additional commands. For those that use the RC5 protocol, add to this first upgrade (Philips_MX3600D_KM.txt ).Load the upgrade into KM and in the functions tab enter device number in the byte 2 column and the OBC's in the OBC column (and label the ones I put in there correctly).

DVD-1539_KM.txt is for the commands that use the RC6 protocol. It is also a generic upgrade for a Philips DVD player (DVD/0539) that you are already using. I have put the buttons of the commands that you learned to the right of the keys they should already be in DVD 539 and added a couple that were missing at the bottom.

You can key move the two commands learned on the TV device to those same buttons using IR and ditto for the cable commands.

Since you haven't done that yet, it makes me wonder if you are using an old version of IR, that isn't decoding these learned commands for you?

Finally, have you read this?

It should cover the mechanics of what I have described.