JP1 Remotes

I'm trying to implement the functionality as defined in the MiniTutorial1.2. Basically, a short key press on a device key should power on the appropriate devices, a LKP power in any device mode should power down everything. It seems to work a couple times, then the togs get out of sync. Typically, I'll do a LKP power and just the cbl box will go off. Ok, I power down the tv and the dvd from the front panel to sync up, since tog should think everything is off. Then do a skp on the tv key and just the tv turns on. There are other sequences that are weird. This is a just one example.

I was hoping someone could look at my IR save and maybe see something obvious I'm doing wrong.

My setup;

I have posted my current IR save at Yahoo as 2104_Ext1_LDKP.txt.

Philips TV (TV/0054)
Power toggle only

SA Cable Box (CBL/0877)
Power Toggle Only

Oritron DVD/HT (DVD/0652)
KM upgrd learned from OEM remote is @ Yahoo as Oritron_DAV3101_Home_Theater_System_(DVD-0652).txt
Power Toggle only
AV select (AV1/AV2 toggle)
Tuner select (AM/FM toggle)
AV1 input is from cable box
AV2 input is from VCR

Toshiba VCR (VCR/0045)
Power Toggle Only

TOADs
0 - TV Power
1 - CBL Power
2 - DVD Power
3 - VCR Power
4 - AV1/AV2 select (not yet implemented)
5 - AM/FM select (not yet implemented)

Since this is a common problem that others have when mixing TT and LKP's I would suggest you could take a more simpler approach. All I did was create a LKP keymove on the power button in each device where the only short function is the power for the local device such as TV and the long side is X_TV;Power,X_DVD;Power etc. One of mine is below:

$11 $83 $55 $83 $67 $83 $4F $83 $5B $83

$83 is shifted power, $55 is X_TV etc. You must use the shifted power since you want the EFC for power on the button in the device upgrade.

With this set up you can still power on/off the device you are in with a short keypress or optionaly all devices with a long keypress