JP1 Remotes

hi friends , i have a problem , my roku control is missing , in others satellite player like openbox etc i can use an jp1 control to work with it , but this control i dont know if is ir o use another tech like blueetooth , can help me or recommend another way to control it .

the files rmdu files that I have been testing are the ones that you uploaded, but they did not work sometimes when going into standby the computer to press some button turns on again, the only option is to use an rmdu file that are hosted on the site for an android media player in specific and look ...

not work , i think is very difficult find the correct configuration for working remote , my las chance is update de remote.conf from another working rmdu device in the file section , but for moment icant move nothing i try put a mouse or keyboard for it .
thanks robman .

yes , i tried in menu protocol parameter - device this have 0 , then i tried changing one by one ,

is correct the process where i changing data ?

Try this...
https://www.hifi-remote.com/forums/dload.php?action=file&file_id=25365

If it doesn't work, try changing the Device code from 0 to 255.


hi robman , i tried and not work when the dongle enter standby and redlight when recent upload the device upgrade some times the dongle wake up ...

hi , friends i have an dongle polaroid hdmi , android system , remote don't work is broken , i need a rmdu file to make work another remote .
search in the file section i found some files but not work for me ,

can i make an rmdu file from this data in remote.conf(android /etc/remote.conf ...

hi guys , somebody can tell me , how i can add device upgrade for this remote control , is the same than this , in this link https://www.hifi-remote.com/forums/viewtopic.php?t=16181
AT2000-4

[hi guys
i have problem ,
when i tried upgrade device to my atlas 4 remote ,``say file load error no protocol found with name nec1 no repeats`` i know is about protocol problem ,but how can i do add this protocol i supossed i need edit protocol.ini file,
file i tried update is jynxbox v3.rmdu ...

hi
my problem is th next. i have an uei control it name is browse
in the board have 6 pad with holes
and say con1
this control is compatible ith jp1 cable or jp1.2
isaw have an eeprom and a big ic
i try upload some pictures
401rrc-039a01e it say. on the back of the board
thanks

hi
i have some problems with this control
first the rdf files ,,, yes i solved in the file section , download file
ml30 ok
now rmir connect with control in the map i see an millennium 4 image is to like than 3
i try upgrade for my dreambox 500 this files 500s rmdu or dm500 all
this file with my ...

thanks to 3fg
the problem was prolific usb.cable try conwct from the output of serial ,, and this have a maxim ic rs232.
i conect to pin 1 3 5 and gnd.from prolific 2303hx and now is detected by ir software and jp1xtest

i have an atlas jp1 model without sat option button
is posible add dreambox 500s satelite reciver in the cable codes?

hi 3fg
icant do
never detect
ir with jp12dll original failed open jp1x interfase
with jp1x dll newer failed to read jp1x
jp1xtest original jp1x dll no jp1x co,mpatible found ...with newer dll a found jp1x compatible
signature 0000,memory ooo etc this say inclusive without control conecte

a found ...

It the remote is labeled URC-1055 and the board says JP1.2, then it is a JP1.2 remote with a Motorola HCS08 processor. This remote uses flash memroy and does not use an EEPROM. It should work with the 2303 interface.

Please take the time to read the third link above (id=9507) and follow the ...

hi 3fg
the procesor isnt motorola or the ci has another number this is numbers of ic
SP553312Dwe,
9RD60DWE1025,
0L33R,
CTDP0532
all this numbers
i tried jp1.2
change rx tx 2 on3 3on 2 db9 output and nothi ng i try upload a picturde of board