LG 42LH30 TV Discrete Codes?

[csete]

I feel like I had these codes at one point, but I can't find them at this point. I'm in need of the discrete codes for the inputs on this TV.

Any pointers appreciated.
Thanks,
Craig

[mdavej]

Lots of discretes here:
https://www.hifi-remote.com/forums/dload ... e_id=11147

and a few here:
https://www.hifi-remote.com/forums/dload ... e_id=11536

and here:
http://www.remotecentral.com/cgi-bin/fo ... gi?1308839

[csete]

Perfect. Thank you!

[csete]

Lots of discretes here:
https://www.hifi-remote.com/forums/dload ... e_id=11147

and a few here:
https://www.hifi-remote.com/forums/dload ... e_id=11536

and here:
http://www.remotecentral.com/cgi-bin/fo ... gi?1308839

It has been a (long) while since I did much JP1 stuff. I just tried to use these codes as a Keymove in RMIR. Is that correct? I attempted to set the HDMI1 and HDMI3 discrete codes on Macro1 and Macro2 respectively (for both TV and STB modes). My remote is a Potenza BC4 (351601) from my local cable company that I worked via the forums to get proper RDF and map/image files earlier this summer.

Any help appreciated!
Thanks,
Craig

[mdavej]

Post your RMIR file so we can take a look.

[csete]

Post your RMIR file so we can take a look.

Here you go. Thanks for taking a look.

https://www.hifi-remote.com/forums/dload ... e_id=25026

Craig

[mdavej]

Close, but you're using the wrong values. If you look at the codes in the linked device upgrade, you need the numbers in the EFC column, not the OBC column. So edit each of your macros, pick the EFC-5 radio button and replace 233 with 81 and 206 with 46.

[csete]

Well shoot. I hadn't noticed that the first page of that spreadsheet was all OBC codes. The changes you suggested work perfectly. Thanks so much!

Craig