Strong SRT8211 Slingbox

Pasreb · Post by **Pasreb** » Mon May 27, 2019 1:40 am

i'm looking for binary files for remote to a strong SRT8211
can you help us

alanrichey · Post by **alanrichey** » Mon May 27, 2019 1:51 am

Have you tried the SRT89xx one in the File Section ?

Pasreb · Post by **Pasreb** » Mon May 27, 2019 2:03 am

i try this as soon as possible

alanrichey · Post by **alanrichey** » Mon May 27, 2019 3:21 am

Don't bother, this box uses another set of codes. Try https://www.hifi-remote.com/forums/dload ... e_id=25591

Pasreb · Post by **Pasreb** » Mon May 27, 2019 3:36 am

Thanks a lot

Pasreb · Post by **Pasreb** » Tue May 28, 2019 4:27 am

i test but not work

alanrichey · Post by **alanrichey** » Tue May 28, 2019 4:31 am

Please read the installation instructions PROPERLY.

Pasreb · Post by **Pasreb** » Tue May 28, 2019 5:57 am

i read it ans us it
but not work

alanrichey · Post by **alanrichey** » Tue May 28, 2019 6:17 am

What about the second paragraph, which is labelled IMPORTANT and is in bold and highlighted in red: I quote:

IMPORTANT: If you have any problems installing these files please do NOT just report back it 'doesn't work', that is totally useless for someone trying to understand what is going on. So please report all of the following:

And your answer was "it doesn't work".

I despair !!

Pasreb · Post by **Pasreb** » Tue May 28, 2019 8:52 am

i'm sorry but it's impossible for me to just power on and power off the srt 8211

Post by **The Robman** » Tue May 28, 2019 11:59 am

Pasreb, did you read the instructions that Alan provided? He has helped hundreds, maybe thousands, of people with their Slingboxes and he has developed a list of questions that help him help you. The most common response, and the most useless response, is "it doesn't work" because that gives us absolutely nothing to go on, as we don't know if it's not working because of "user error" or because the signals are wrong.

We've been down this road with you before, back in 2015 you said "it doesn't work" and Alan gave you the same response then.

Pasreb · Post by **Pasreb** » Tue May 28, 2019 11:20 pm

i test the process step by step

Pasreb · Post by **Pasreb** » Tue May 28, 2019 11:49 pm

1. What model Slingbox do you have?

Slingbox PRO HD

2. Was there any error message after you typed in the Code and tapped the Test button (or selected the file and tapped ‘Continue’ on the M1 & M2)?

Nothing

3. Did you give the commands plenty of time to react? (I have a DVR that takes about 6-8 seconds to power up/down)

Yes 1 minute

4. If you are using a Solo did you try both BIN files?

5. After completing the setup do any of the buttons work?

no

6. If you are installing on a Solo or Pro-HD or older box that uses an external IR Blaster, have you used a Digital Camera or Mobile Phone Camera to confirm the IR Blaster is actually firing when you tap the Power button? (Watch the tip of the IR Blaster through the viewfinder while you tap a button. You should see a white (not red) flash. Test it on a real remote so you know what you are looking for). If you are using a 350/500/M1/M2 have you tried using the external blaster?

i test the blaster with a phone camera and i see a white flash
the blaster work in another slingbox with another dvb-T tuner or cable box

7. Have you experimented with the placement of the IR Blaster? On some devices this is critical so don’t give up too quickly. Try shining a flashlight at the front of the receiver and see if you can see the IR receiver behind the smoked glass.

yes

8. Are you sure the device is working correctly using the real remote?

yes it's a new tuner and the remote is ok and work cerrectly

9. Are you sure your device is set to use IR ? Many boxes can operate on RF or IR and if it is set to RF then the Slingbox will not affect it.

it's a IR box with a IR remote not RF

10. If you have a device that supports multiple remote addresses (DirecTV, Dish Network, Tivo…) are you sure the remote address is set to the default ?

i don't understand the question

11. Have you tried resetting the Slingbox. ? This has been found to help.

yes i reset it

12. Do you have access to a Logitech Harmony Universal Remote? If so let me know.

Pasreb · Post by **Pasreb** » Wed May 29, 2019 6:27 am

Fichier.bin personnalisé non valide, cliquez ici pour obtenir de l’aide.

here the error message in french[/b]

alanrichey · Post by **alanrichey** » Wed May 29, 2019 7:14 am

So why did you answer NO in Question 2 if you did get an error message ?

This is also covered in the instructions, it means the installation cannot find the BIN file. Did you not read them again ?

Where did you put it ?
What are you typing in for the location ?