New Mill4 version discovered

[jamesgammel]

Thanks to John Head, we've uncovered yet another version of the Millenium 4 remote. We haven't ascertained yet if it's "officially' a B02 or B03. However, thus far we've found out that the advcode address start is 01A versus the 01B for the B00, and 01C for the B01/B04. It does use an epoxy Blob like the B00 and B01, unlike the B04 which has a "real" chip for the MCU. More testing will tell if other rdf changes are going to be needed. In time, a new RDF will be posted in the RDF folder at yahoo (aren't you so thrilled Nils?) For now he's using the B00 RDF with just the advcodeadress manually changed to $01A. Externally, it's like the later B00/B01/B04 versions which have the supermacro keys labelled as ABC rather than the early B00's "F" designation.

Jim

[Nils_Ekberg]

In time, a new RDF will be posted in the RDF folder at yahoo (aren't you so thrilled Nils?) For now he's using the B00 RDF with just the advcodeadress manually changed to $01A. Externally, it's like the later B00/B01/B04 versions which have the supermacro keys labelled as ABC rather than the early B00's "F" designation.

Jim

Exciting, that will put us at an even 100 active RDF's. Let me know how the testing goes.

[jamesgammel]

There's a few details still to be worked out. Using YM, we were able to confirm that his needs a different rdf, with at least the advancecodes address changed to $01A. The other minor details still need to be examined, but we ran out of time for the day. IE, the macro lock device, etc. It may end up the B01 with the advcode address changed will fit better. As far as I can see, that and if it has cable lock may be the two major things to examine yet. I may just email you the new rdf and you can do your thing and post it when you do a update. may need to adjust the "identification" for all three to keep them in sync with each other.

Jim