List of Radio Shack Remotes that are JP1???

jherrick · Post by **jherrick** » Wed Feb 16, 2005 7:23 am

The Robman wrote:I had never heard of the 15-2144 before now, but I do see it listed on the Radio Shack web site.

Also notice that, while RS doesn't say that it's upgradeable, they do say that it has a 60K IC. I wonder what they are referring to. It doesn't make much sense to put a 60K EEPROM (if there even is such a thing in those denominations) into a non-upgradeable remote. I wonder if there is something hidden in that meaning/some functions we could access with jp1 (or jp1.2 when it comes about).

If it is just for more code coverage, as they suggest, and they have included a lot of codes, maybe it could be useful to someone with an MX-500 or something. I guess we'll see.

Rob, when do you think you may know something more on this? I would go pick one up, but they aren't in stores anywhere near me yet.

Post by **The Robman** » Wed Feb 16, 2005 7:30 am

I just got word that it does have a 6-pin, but it uses the new flash part, so it's not JP1able yet.

davlas · Post by **davlas** » Mon Mar 13, 2006 11:49 am

Does anybody know if the non-jp1 status of the RC 15-2144 has changed?

I'd be very interested in getting it to run my Denon AVR-2803 (at least power, input select and vol.) but it doesn't come with receiver support.

I like the mix of hard buttons for common use items and the Kameleon display for simplified viewing.

-dave

whompus · Post by **whompus** » Mon Mar 13, 2006 1:19 pm

I don't think the status has changed yet. That remote claims to control Home Theater In a Box. So you could see if it has code 1360 in it. If so it will likely give you some functions. Then you might be able to do keymoves based on the denon 3803 file in the audio section. As the 1360 code is denon dev 2:12 code.

MaskedMan · Post by **MaskedMan** » Mon Mar 13, 2006 2:13 pm

davlas wrote:Does anybody know if the non-jp1 status of the RC 15-2144 has changed?

I'd be very interested in getting it to run my Denon AVR-2803 (at least power, input select and vol.) but it doesn't come with receiver support.

I like the mix of hard buttons for common use items and the Kameleon display for simplified viewing.

-dave

If you like a Hybrid remote, give the OFA urc-6690 a try, it has greater library of codes then the 2144, it is also a learning remote.

davlas · Post by **davlas** » Mon Mar 13, 2006 3:55 pm

whompus wrote:I don't think the status has changed yet. That remote claims to control Home Theater In a Box. So you could see if it has code 1360 in it. If so it will likely give you some functions. Then you might be able to do keymoves based on the denon 3803 file in the audio section. As the 1360 code is denon dev 2:12 code.

Thanks whompus! I did get to try all the denon codes i could find on each device, but to no avail.
-dave

davlas · Post by **davlas** » Mon Mar 13, 2006 4:01 pm

MaskedMan wrote:If you like a Hybrid remote, give the OFA urc-6690 a try, it has greater library of codes then the 2144, it is also a learning remote.

That's true. Thanks for the info. I've also seen that ofa-international has some "Second gen" remotes coming out. Don't know if they'll make it to the US. URC 8206- 6 Devices but that's for another thread.

-dave

Post by **The Robman** » Mon Mar 13, 2006 4:27 pm

OFA (Europe) and OFA (USA) are completely different companies, so while their remotes are all made by UEI, you won't see the European models here, or vice versa, except for when individuals sell them via ebay.

Also, the "2nd gen" remotes are all JP1.2, which is incompatible with JP1 (at this time).

JP1 Remotes

List of Radio Shack Remotes that are JP1???

Well it's a year later now...

Re: Well it's a year later now...

Re: Well it's a year later now...