Need help converting a lirc file

[shagy]

could sombody help me to make this lirc file to rmdu file please??

begin remote

name RD-335E
bits 32
flags SPACE_ENC
eps 20
aeps 200

header 8800 4400
one 550 1650
zero 550 550
ptrail 550
repeat 8800 2200
gap 38500
toggle_bit 0

frequency 38000

begin codes
POWER_ON 0x0000000020DF827D
VOLUME'/\' 0x0000000020DF40BF
VOLUME'\/' 0x0000000020DFC03F
MUTE 0x0000000020DF50AF
POWER_OFF 0x0000000020DF42BD
VIDEO1 0x0000000020DFAA55
VIDEO2 0x0000000020DF6A95
RGB1 0x0000000020DFDA25
RGB2 0x0000000020DF22DD
DEGAUSS 0x0000000020DFC23D
RAST_CTRL,WIDTH'><' 0x0000000020DF52AD
RAST_CTRL,WIDTH'<>' 0x0000000020DF926D
RAST_CTRL,HEIGHT'SMA 0x0000000020DF32CD
RAST_CTRL,HEIGHT'LAR 0x0000000020DFD22D
RAST_CTRL,SIDEPIN'>< 0x0000000020DFB946
RAST_CTRL,SIDEPIN'<> 0x0000000020DF39C6
RAST_CTRL,SCAN_SELEC 0x0000000020DFB24D
RAST_CTRL,USER_PRESE 0x0000000020DFF20D
RAST_CTRL,NORMAL 0x0000000020DF728D
RAST_CTRL,POSIT_'/\' 0x0000000020DFE21D
RAST_CTRL,POSIT_'<' 0x0000000020DF629D
RAST_CTRL,POSIT_'>' 0x0000000020DFA25D
RAST_CTRL,POSIT_'\/' 0x0000000020DF12ED
RGB/VIDEO,CONTRAS'/\ 0x0000000020DF29D6
RGB/VIDEO,CONTRAS'\/ 0x0000000020DFA956
RGB/VIDEO,BRIGHT'/\' 0x0000000020DF49B6
RGB/VIDEO,BRIGHT'\/' 0x0000000020DFC936
VIDEO,COLOR'/\' 0x0000000020DF6996
VIDEO,COLOR'\/' 0x0000000020DFE916
VIDEO,TINT'/\' 0x0000000020DF19E6
VIDEO,TINT'\/' 0x0000000020DF9966
VIDEO,SHARPNESS'/\' 0x0000000020DF09F6
VIDEO,SHARPNESS'\/' 0x0000000020DF8976
VIS_CTRL,USER_PRESET 0x0000000020DFD926
VIS_CTRL,NORMAL 0x0000000020DF59A6
end codes

end remote

[johnsfine]

I don't have time for a careful look at the moment, but at first glance that looks like the standard NEC projector code set.

There are lots of CCF files available for that and I'm sure a few JP1 upgrade files (NEC1 protocol, device 4).

It's a lot easier to work from an existing JP1 upgrade or a CCF file rather than an LIRC file.

If I'm reading this right, once you create or find and RM upgrade for NEC1, device 4, the last two digits of each LIRC line are probably the hex cmd in RM's function sheet, so you can check existing functions to see if I'm on the right track and/or put in missing functions.

I'll help some more (much) later with the LIRC file if that advice doesn't solve it and if no one else helps.

[Capn Trips]

To echo (and pile on) what John said, it's usually easier to ask for that which you really need - which in this case I suspect is NOT necessarily a translation of this particular LIRC file, but a RMDU file for a particular device. If you ask for THAT, you're more likely to get a faster useful response here. So if John is correct is his assumption, you would ask for a device upgrade for a particualr brand and model of projector, and you could possibly find it in the file section by yourself, or someone could help you find one here or over at remotecentral.

I'd recommend reading the number 1 code search FAQ (linked in my sig below) and see if that sticky post doesn't point you in some useful directions.