OFA 9910b Sony BR-DVD upgrade

radunn · Post by **radunn** » Thu Nov 28, 2013 5:18 am

I'm creating a new upgrade as a replacement. I'm reading the tutorial JP1 - Just How Easy Is It - RM-IR Version - JP1 Remote Control System.htm and am at Assigning the Learned buttons from your OEM remote on the Functions tab. Copying/Pasting from the Name, Hex rows are askew due to a few device buttons listed as ** multiple ** at Protocol. Do I need to relearn the *multiple* buttons; there are 3?

Also due to MEM FULL when learning from the OEM remote I created 2 files; how do I append the data into the upgrade file? In advance thank you for your time and support.

File link: https://www.hifi-remote.com/forums/dload ... e_id=12165

chuliu · Post by **chuliu** » Sun Jan 05, 2014 12:30 pm

Correct me if I am wrong.
The signal shows multiple, you need to relearn them.
They are failed leans.

Your remote uses a known sony protocol and you only need to use remotemaster to build an upgrade file for your device.

mdavej · Post by **mdavej** » Sun Jan 05, 2014 12:35 pm

No need to make an upgrade. All Sony Bluray players use the same codes. Any existing upgrade like the one below will work fine.
https://www.hifi-remote.com/forums/dload ... e_id=11069

EDIT: I looked at your learns, and as I predicted, they are identical to the above upgrade.