Yamaha Home Theater 5560

venik · Post by **venik** » Sun Mar 14, 2004 2:13 pm

I have a Yamaha 5560 Home Theater. My understanding of the JP1 process is such that it would be MUCH easier of someone who is both an owner of that system and a JP1 expert made an upgrade file. Is there a similar device that I could use, if that does not happen?
Thanks,

jon_armstrong · Post by **jon_armstrong** » Sun Mar 14, 2004 2:51 pm

We "hide" those upgrades here looks like three
likely candidates and one for your exact model.

Post by **The Robman** » Sun Mar 14, 2004 6:03 pm

You can see for yourself just how easy it is to create an upgrade here:
https://www.hifi-remote.com/wiki/index.php/JP1_-_Just_How_Easy_Is_It%3F

venik · Post by **venik** » Mon Mar 15, 2004 8:02 am

Thanks a million, Rob, for this wonderful labor of love. It is VERY helpful.
However, I still need help.
I followed the instructions in your document, and loaded an upgrade file for my Yamaha 5560 Home Theater system. I them copied and pasted the device codes from KM to IR, and assigned the code 0176 to AUDIO.
However, when I looked (in IR) at the GENERAL tab, all other devices had no codes associated with them (other than audio, which was 0176).
Needless to say, when I loaded the stuff to my 15-2116, it did not work at all.
Obviously, there are still some steps that I am missing...

gfb107 · Post by **gfb107** » Mon Mar 15, 2004 9:29 am

You forgot to download from your remote before copying the code into IR. That would have ADDED the device to your existing setup.
What you did is create an empty setup, then added the device code, then uploaded it to your remote, overwriting your previous setup.

jon_armstrong · Post by **jon_armstrong** » Mon Mar 15, 2004 6:05 pm

Another good thing to add to Rob's document.

venik · Post by **venik** » Mon Mar 15, 2004 10:31 pm

OK. Now that I did download the stuff from the reomte to IR, and pasted the data from the KM file for the Yamaha 5560 to IR, many of the functions of the Yamaha controller work, but not all. I shall have to start tinkering. I am trying to get as many of the AMP modes of the Yamaha HT onto the 2116 (Concert Hall, Jazz Club, etc.).

Post by **The Robman** » Tue Mar 16, 2004 7:19 am

If you want us to take a look at what you're doing to see what you might be doing wrong, zip together your IR file and KM file and load it into the Diagnosis Area. Then PLEASE post a link to the file here.

venik · Post by **venik** » Wed Mar 17, 2004 8:56 pm

I have added a zip file to the DIagnostic area. It is called yamaha5560venik.zip. It has my KM and IR files for the RS 15-2116 and the Yamaha HT 5560. They work OK together, although many of the functions are missing, because of the smaller number of functions on the 2116, which has only one set of arrows ring, unlike the Yamaha RC that has 2.

JP1 Remotes

Yamaha Home Theater 5560

Yamaha Home Theater 5560

Zip file from venik